米地小子音樂工作室

從 Pultec 到 Pultec Pro 再到 Pultec Passive EQ Plug-In Collection，終於金剛組合完成了！

UAD Pultec Passive EQ Plug-In Collection Trailer

Pultec Passive EQ Plug-In Collection

Astonishingly accurate recreations of the “must-have” classic EQs

Building on a decade of the world’s most intensive modeling research, UA has recreated the famed Pultec EQ experience – one that’s nearly indistinguishable from the original analog hardware.

Now you can:

• Get that signature airy, smooth-as-silk Pultec sound on your tracks – just by passing them through the plug-in.
• Dial up extreme levels of EQ boost while staying natural and musical.
• Make difficult-to-isolate instruments and vocals breathtakingly clear without affecting neighboring frequencies.
• Hear the Pultec's transformer and tube-based amplifier sections — far more accurately than ever before.

The Pultec Story

When Ollie Summerland and Gene Shenk hand-crafted the first Pulse Technologies passive program equalizer in 1951, they had no idea they were transforming an industry. But like a Stradivarius, their little garage-built, made-to-order device was copied by every EQ-maker for decades, and their early EQP-1A's still bring $4,000 plus on the used market — if you’re lucky enough to find one.  

The reason for all the fuss is the Pultec’s unparalleled sound and control. Words like “airy,” “silky,” and “warm” are often used to describe the Pultec's effect on vocals, guitar, bass, kick drums, and full mixes — pretty much everything.

The new Pultec Passive EQ Collection for UAD-2 and Apollo hardware is the ultimate plug-in emulation of Pulse Techniques’ original passive EQs. With painstaking amplifier section modeling now onboard, the Pultec EQ Collection "breathes" like the original hardware. 

Key Features

• Painstaking circuit reproduction of the most popular outboard studio equalizers ever made
• Must-have studio staple Pultec Equalizers: EQP-1A Program EQ, MEQ-5 Mid-Range EQ, HLF-3C Filters
• Models entire electronic path, including tube amplifiers and transformers, for colorful, highly-musical distortion
• Silky, vintage highs and tight, focused lows using combined boost/cut resonant shelf dip with EQP-1A
• Broad, overlapping frequency selections for fine peak and dip midrange filter control with the MEQ-5
• 12 dB cut filter tonal sculpting or special effects with the HLF-3C
• Includes Artist Presets from Neal Cappellino, Jacknife Lee, and John Paterno
• Requires a UAD-2 DSP Accelerator or Apollo Interface available from authorized dealers worldwide
• Low Frequency switch: 20, 30, 60, 100 CPS (Hz); frequency cycle button with "CPS" label, shift + click to reverse
• Low Frequency Boost knob: 0.00 to 10.0 shelf filter; can be used simultaneously with LF attenuation
• Low Frequency Atten knob: 0.00 to 10.0 shelf filter; can be used simultaneously with LF boost
• High Frequency switch: 3, 4, 5, 8, 10, 12,  16 KCS (kHz); frequency cycle button with "KCS" label, shift + click to reverse
• High Frequency Boost knob: 0.00 to 10.0 peak filter    
• High Frequency Bandwidth knob: 0.00 to 10.0 Q, sharp to broad       
• High Frequency Atten switch: 5, 10, 20 KCS (kHz); frequency cycle button with "ATTEN SEL" label, shift + click to reverse
• High Frequency Atten knob: 0.00 to 10.0 shelf filter
• Enable switch: Out/In; soft bypass, system filtering/nonlinearities still present
• Output/Power knob: -12.0 to 12.0 dB provides clean, unculored gain, clickstop/Off disables all DSP processing; clicking “OFF” label toggles between hard bypass and  and previous Output gain value,  “0” label provides RTZ (return to zero) button
• Low Mid Frequency switch: 200, 300, 500, 700, 1000 CPS (Hz); frequency cycle button with "PEAK" label, shift + click to reverse
• Low Mid Peak Boost knob: 0.00 to 10.0 peak filter
• Mid Frequency Dip switch: 200, 300, 500, 700, 1, 1.5, 2, 3, 4, 5, 7 CPS/KCS (Hz/kHz); frequency cycle button with "DIP" label, Shift + click to reverse
• Mid Frequency Dip knob: 0.00 to 10.0 dip/notch  filter
• High Mid Frequency switch: 1.5, 2, 3, 4, 5 KCS (kHz); frequency cycle button with "PEAK" label, shift + click to reverse
• High Mid Boost knob: 0.00 to 10.0 peak filter
• Enable switch: Out/In; soft bypass, system filtering and nonlinearities still present
• Output/Power knob: -12.0 to 12.0 dB provides clean, unculored gain, clickstop/Off disables all DSP processing; clicking “OFF” label toggles between hard bypass and previous Output gain value,  “0” label provides RTZ (return to zero) button
• Low Cut-Off switch: Off, 50, 80, 100, 150, 250, 500, 750, 1000, 1500, 2000 CPS (Hz) 12dB per octave; frequency cycle button with "CPS" label, shift + click to reverse
• High Cut-Off switch: 1.5, 2, 3, 4, 5, 6, 8, 10, 12, 15, Off KCS 12dB per octave (kHz); frequency cycle button with "KCS" label, Shift + click to reverse
• Enable switch: Out/In; disables/enables all processing

Parameter Specifications

Pultec EQP-1A Program Equalizer

• Low Frequency switch: 20, 30, 60, 100 CPS (Hz); frequency cycle button with "CPS" label, shift + click to reverse
• Low Frequency Boost knob: 0.00 to 10.0 shelf filter; can be used simultaneously with LF attenuation
• Low Frequency Atten knob: 0.00 to 10.0 shelf filter; can be used simultaneously with LF boost
• High Frequency switch: 3, 4, 5, 8, 10, 12,  16 KCS (kHz); frequency cycle button with "KCS" label, shift + click to reverse
• High Frequency Boost knob: 0.00 to 10.0 peak filter    
• High Frequency Bandwidth knob: 0.00 to 10.0 Q, sharp to broad       
• High Frequency Atten switch: 5, 10, 20 KCS (kHz); frequency cycle button with "ATTEN SEL" label, shift + click to reverse
• High Frequency Atten knob: 0.00 to 10.0 shelf filter
• Enable switch: Out/In; soft bypass, system filtering/nonlinearities still present
• Output/Power knob: -12.0 to 12.0 dB provides clean, unculored gain, clickstop/Off disables all DSP processing; clicking “OFF” label toggles between hard bypass and  and previous Output gain value,  “0” label provides RTZ (return to zero) button
• Low Mid Frequency switch: 200, 300, 500, 700, 1000 CPS (Hz); frequency cycle button with "PEAK" label, shift + click to reverse
• Low Mid Peak Boost knob: 0.00 to 10.0 peak filter
• Mid Frequency Dip switch: 200, 300, 500, 700, 1, 1.5, 2, 3, 4, 5, 7 CPS/KCS (Hz/kHz); frequency cycle button with "DIP" label, Shift + click to reverse
• Mid Frequency Dip knob: 0.00 to 10.0 dip/notch  filter
• High Mid Frequency switch: 1.5, 2, 3, 4, 5 KCS (kHz); frequency cycle button with "PEAK" label, shift + click to reverse
• High Mid Boost knob: 0.00 to 10.0 peak filter
• Enable switch: Out/In; soft bypass, system filtering and nonlinearities still present
• Output/Power knob: -12.0 to 12.0 dB provides clean, unculored gain, clickstop/Off disables all DSP processing; clicking “OFF” label toggles between hard bypass and previous Output gain value,  “0” label provides RTZ (return to zero) button
• Low Cut-Off switch: Off, 50, 80, 100, 150, 250, 500, 750, 1000, 1500, 2000 CPS (Hz) 12dB per octave; frequency cycle button with "CPS" label, shift + click to reverse
• High Cut-Off switch: 1.5, 2, 3, 4, 5, 6, 8, 10, 12, 15, Off KCS 12dB per octave (kHz); frequency cycle button with "KCS" label, Shift + click to reverse
• Enable switch: Out/In; disables/enables all processing

Pultec MEQ-5 Mid-Range Equalizer

• Low Mid Frequency switch: 200, 300, 500, 700, 1000 CPS (Hz); frequency cycle button with "PEAK" label, shift + click to reverse
• Low Mid Peak Boost knob: 0.00 to 10.0 peak filter
• Mid Frequency Dip switch: 200, 300, 500, 700, 1, 1.5, 2, 3, 4, 5, 7 CPS/KCS (Hz/kHz); frequency cycle button with "DIP" label, Shift + click to reverse
• Mid Frequency Dip knob: 0.00 to 10.0 dip/notch  filter
• High Mid Frequency switch: 1.5, 2, 3, 4, 5 KCS (kHz); frequency cycle button with "PEAK" label, shift + click to reverse
• High Mid Boost knob: 0.00 to 10.0 peak filter
• Enable switch: Out/In; soft bypass, system filtering and nonlinearities still present
• Output/Power knob: -12.0 to 12.0 dB provides clean, unculored gain, clickstop/Off disables all DSP processing; clicking “OFF” label toggles between hard bypass and previous Output gain value,  “0” label provides RTZ (return to zero) button

Pultec HLF-3C Cut Filters

• Low Cut-Off switch: Off, 50, 80, 100, 150, 250, 500, 750, 1000, 1500, 2000 CPS (Hz) 12dB per octave; frequency cycle button with "CPS" label, shift + click to reverse
• High Cut-Off switch: 1.5, 2, 3, 4, 5, 6, 8, 10, 12, 15, Off KCS 12dB per octave (kHz); frequency cycle button with "KCS" label, Shift + click to reverse
• Enable switch: Out/In; disables/enables all processing